Accessories | Coats

Sliding Arm Adapters

2 silver blocks with octagonal black pads screwed into the blocks

Sliding Arm Adapters (Set of 2) for 2 Post models, assisting in utilizing difficult lift points.

Nickel Plated 3″ and 6″ Stack Pad Height Adapters

Silver tube-like adapters. 4 are smaller in length and width. The other 4 are longer and wider.

8 piece nickel plated adapters for 2 Post models.

Double Screw Universal Pad

Metal, square shaped, screw in adapter with black rubber pad on the top of the metal adapter

4” rubber replacement pad for 4T42100036.

Traverse Beams and Screw Up Adapters

2 Traverse Beams and 4 Screw Up adapters for Double Scissor model numbers: 4TS6SSOR1, 4TS10SSOR1, 4TS10SSOR1FM.

Air Kit

A red air hose line is attached to the side of the lift runway

Factory installed air kit for all 4 Post and Scissor lifts for technicians to use air tools, disconnects not provided.

6,000 lb HD Rolling Jack

Heavy Duty, Coats 6,000 lb. capacity air hydraulic rolling jack. For Scissor Lifts with these part numbers: 4TS12OSAR1, 4TS12OSAR1FM, 4TS12OSSR1, 4TS12OSSR1FM. 1 year warranty included.

Turn Plate Roll Back Bars

A yellow, metal tube placed in the gap between the lift's runway and front turn plate

Set of 2 used during alignment procedures and service.

Stainless Steel Front Turn Plates

silver, square, metal plate with a hexagonal thin plate on top

Set of 2 Stainless Steel Front Turn Plates for all 4 Post and Scissor alignment lifts for additional protection and increasing the lift of the lift.

Stainless Steel Rear Turn Plates

a silver, rectangular piece of metal attached to the surface of an alignment lift

Set of 2 Stainless Steel Rear Turn Plates for all 4 Post and Scissor alignment lifts for additional protection and increasing the life of the lift.

Mobile Columns Wheel Support Stand

Triangular shape with wheels on the bottom and adjustable height latches on the top.

19K portable adjustable height stand for additional support during service, use with mobile columns.