Skip to content
Home
Video
Mounting Reverse Drop Center Wheel using Coats 80C Center Post

Mounting Reverse Drop Center Wheel using Coats 80C Center Post

In the world of custom and high-end wheel assemblies, precision and care are crucial. The COATS 80C Center Post Tire Changer, equipped with the flange plate accessory, ensures a scratch-free and damage-free process for mounting and servicing reverse drop center wheels. This step-by-step guide demonstrates how to use the flange plate to handle even the most delicate wheels with confidence and efficiency.

Why Use the COATS Flange Plate Accessory?

The flange plate accessory is an essential tool for protecting wheel hubs during tire servicing. Designed to:

  • Prevent Scratches: Eliminates the risk of hub damage during mounting and de-mounting.
  • Adapt to Various Wheels: Configures easily for 4- to 8-lug wheel assemblies.
  • Ensure Security: Provides a stable, reliable system for working on custom or reverse drop center wheels.

Step-by-Step Guide: Configuring and Using the Flange Plate

Configuring the Flange Plate

  1. Identify the Master Pin:
    • Locate the master pin, marked with a zero, on the flange plate. This pin remains fixed and is never removed.
  2. Adjust the Number of Pins:
    • To configure the plate for a specific lug pattern (e.g., 4-pin setup):
      • Refer to the numbers on the base of the plate.
      • Insert a pin into each hole labeled with the required number (e.g., โ€œ4โ€ for a 4-lug wheel setup).
      • Ensure each pinโ€™s smaller locator pin aligns with its designated hole.
  3. Verify Configuration:
    • Double-check that the plate is correctly set up for the desired lug pattern.

Sizing and Positioning the Flange Plate

  1. Size the Pin Diameter:
    • Lay the wheel flat and use it as a guide to adjust the pins for the correct diameter. Alternatively, use the included caliper to measure the wheel lug holes and size the plate accordingly.
  2. Align the Plate:
    • Place the plate on the 80C center post, ensuring the locator pin aligns with the post.
  3. Position the Wheel:
    • Carefully position the wheel assembly over the flange plate, threading the lug holes onto the pins.

Securing and Servicing the Wheel

  1. Tighten the Center Locking Mechanism:
    • Once the wheel is securely in place, tighten the center locking mechanism to ensure stability during servicing.
  2. Proceed with Normal Servicing:
    • Service the wheel as usual, taking advantage of the COATS 80Cโ€™s robust features to handle the job efficiently and safely.

Trust the World Leader in Wheel Service Equipment

The COATS 80C Center Post Tire Changer and its flange plate accessory represent the pinnacle of quality, safety, and reliability in wheel servicing. Designed with the needs of todayโ€™s tire shops in mind, this system provides unmatched performance for custom and high-end wheel assemblies.

When it comes to protecting your customersโ€™ investments, trust COATS โ€“ the world leader in wheel service equipment.