Back cone spring for 40mm shaft diameter wheel balancers. Used with centering cones and collets when back cone mounting a tire onto the wheel balancer.
Accessory Archives
Cone C 2.78″-3.65″ Standard Cone Kit
Cone C with 2.78″-3.65″ range from the Standard Cone Kit for 40mm diameter shaft wheel balancers. This cone adapter is used to mount wheels on to the balancer shaft from the backside of the wheel through the hub bore.
Cone B 2.16″-3.03,” Standard Cone Kit
Cone B with 2.16″-3.03″ range from the Standard Cone Kit for 40mm diameter shaft wheel balancers. This cone adapter is used to mount wheels on to the balancer shaft from the backside of the wheel through the hub bore.
Cone A 1.65″-2.43,” Standard Cone Kit
Cone A with a 1.65″-2.43,” range from the Standard Cone Kit for 40mm diameter shaft wheel balancers. This cone adapter is used to mount wheels on to the balancer shaft from the backside of the wheel through the hub bore.
Short Cone, 2.650″-3.025″
Short Cone with 2.650″ – 3.025″ (67.31-76.84mm) range for 40mm diameter wheel balancer shaft.
Special Applications Light Truck Cone (3.29″-4.47″)
Special Applications Light Truck Cone with a 3.29″ – 4.47″ range for Tacomas. For 40mm shaft diameter wheel balancers.
Cone D 3.25″-5.20″ Standard Cone Kit
Cone D with 3.25″-5.20″ range from the Standard Cone Set for 40mm diameter shaft wheel balancers. This cone adapter is used to mount wheels on to the balancer shaft from the backside of the wheel through the hub bore.
Truck Cone Kit, Double Sided, 4.8″-6.8″
Truck Cone Kit with Double Sided Cone & Metal Backing Plate. Ranges from 4.80″-6.80.” Compatible with 40mm shaft diameter wheel balancers.
775/875/1175 Light Truck Back Cone Spacer
Light truck back cone spacer, For Coats 775/875/1175 Balancers. Allows back coning of wheels with up to 5.20″ (132.08mm) center-holes.
Light Truck Viper Back Cone Spacer
Light truck Viper back cone spacer allows back coning of wheels with up to 5.20″ (132.08mm) center-holes. For Coats Balancers (NOT for use on 775/875/1175).