Skip to content
MAXX LIFTS

Maxx Service Four Post Lifts

Maxx Service Four Post Lifts are heavy duty automotive lifts built for long-term durability and high-capacity service. Available in 15K, 19K, 30K, and 33K capacities, these drive-on lifts are designed for high-duty cycle shops servicing everything from passenger vehicles to commercial trucks.

Four Post Lifts Assembled in North America

Maxx Service Four Post Lifts provide the strength and runway length needed to service cars, trucks, vans, and commercial vehicles. They’re assembled in North America with USA made power units that deliver consistent performance over years of operation.

We build lifts that last longer, perform better,

and cost less to operate

Less Maintenance by Design

Reliable Power that’s USA Made

Every Maxx automotive four post lift is powered by a USA-made Bucher pump and motor (2HP and 4HP power units) delivering reliable hydraulic performance that keeps your shop moving for years with little maintenance.

Resilience built into every component.  

Built Heavier. Built Smarter. Built Maxx Tough. 

Specification
N415 (Service 4 Posts) N419 (Service 4 Posts)
Capacity 15,000 lb/6.8 T 19,000 lb/8.6 T
Lift Style Open Front Closed Front Closed Front
Raised Height 75” (1,905mm) 74” (1,880mm)
Lowered Height 8 3/8” (213mm) 10” (254mm)
Overall Length Standard 260 1/2” (6,617 mm) 274 3/8” (6,969mm)
Overall Length Extended 287 1/2” (7,303mm) 301 3/8” (7,655mm)
Deck Length Standard 211” (5,359mm) 210 3/8” (5,344mm)
Deck Length Extended 238” (6,045mm) 238” (6,045mm)
Width Between Runways 41” (1,041mm) 41” (1,041mm)
Runway Deck Width 23” (584mm) 23” (584mm)
Overall Width Front/Rear 143-137 1/2” 137 1/2” 150” (3,810mm)
Max Column Height 101 1/2” (2,587mm) 86” (2,184mm) 86” (2,184mm)
4 Wheel Base (Standard) min: 84”, max: 198” min: 84”, max: 198”
2 Wheel base (Extended) max: 226” max: 226”
Lift Time 70 seconds 70 seconds
Power Requirements 230V, 60Hz, 1 Ph, 25 amp 230V, 60Hz, 1 Ph, 25 amp
Recommended Jacking Beam 7,500 lb/3.5 T 9,000 lb/4.1 T
ALI Certified Yes (see part numbers) Yes (see part numbers)
Part Numbers: Open: 4T415OSSR1 / 4T415OXSR1
Closed: 4T415CSSR1 / 4T415CXSR1
Closed: 4T419CSSR1 / 4T419CXSR1
Warranty 1 year parts (1 year freight on all parts), 1 year labor
5 Years on Lift Structural Parts: columns, carriage blocks, overhead support, arms
2 Years on Lift Hydraulic Parts: power lift, hydraulic lines, hydraulic cylinders

MAXX ALIGNMENT LIFT COMPATIBLE accessories

Square pan with metal grate and four wheels.

Rolling Waste Oil Drain

#T4RWOD

Square step with grip tape strips.

Moveable Work Steps

#TMWS

LED clear lighting tube that mounts on interior of the runway.

LED Light Kit

#TLED1

A yellow, metal tube placed in the gap between the lift's runway and front turn plate

Turn Plate Roll Back Bars

#TTPRBB

The Maxx Lift Advantage

Strength and Safety


Lifts Built for Safety

All Maxx Four Post Lifts comply with all industry safety and operational standards, such as structural integrity, mechanical safety systems, hydraulic and electrical systems, and load testing

Lift Inspections

Our Coats Service Network Lift Inspectors are tested, qualified, and ALI Certified to inspect ANY brand of automotive lift, using the ALI Check360 Certified Lift Inspection Program. You're calling upon the only service network staffed coast to coast by our technicians.

Complete Your Service Bay

With Maxx Lifts, your bay is equipped with the right lift for the vehicles you service. Complete your shop with Maxx Tire Changers that are engineered to perform and expand your shop’s service offerings.

Frequently Asked Questions

15,000 lb, 19,000 lb, 30,000 lb, and 33,000 lb capacities.

Standard four post lifts require a bay 14′ to 16′ wide and 20′ to 28′ long with 10′ ceiling height. Wheelbase capability of the lift determines actual bay length.

Lifts should always be installed on level concrete floors with a minimum of 4 inches (102 mm) and 3000 psi (20.7MPa) concrete that has been aged a minimum of 30 days. Most two post lifts require a constant supply of 230 volt – 1 phase – 60 Hz electrical power and a 20 amp circuit breaker.

Yes. Maxx Service Four Post Automotive Lifts are available in standard and extended runway length models. 30K and 33K capacities also have an extra long model. They can be equipped with drive thru kits too.

Lifts should always be installed on level concrete floors with a minimum of 4 inches (102 mm) and 3000 psi (20.7MPa) concrete aged for a minimum of 30 days. All lifts must be installed to meet local building and electrical codes.

Reach Out To Us

Discover the advantages of our Maxx Series tire changers and learn why we're the best!

Service Vehicle

Never miss out on new product releases! Subscribe to our newsletter.

By pressing subscribe, you agree to receive updates and promotional materials from Coats.*