Automotive Lift Accessories

Set of 4 truck pads

Set of 4 low pads 1 1/2″

Set of 4 Medium 3″ lifting pads

Coats 3″ Stack Pad Height Adapters (set of 4) for 2 post lifts

Coats 6″ Stack Pad Height Adapters (Set of 4) for 2 post lifts.

1 adapter with a round style rubber contact area for EV lifting.

Zinc plated arms and scissor and two lock positions, with a telescoping arm range reach of 43″ to 63.5″. One year parts warranty included.

2 Available Capacities:

12,000 lb. (part number 4TRJ12000)

15,000 lb. (part number 4TRJ15000)

Made with stainless steel suspension and rollers with a low maintenance pump. Height extensions and rubber pad adapters in addition, with a telescoping range reach of 30.75” – 59″. 5 year parts warranty included.

5 Available Capacities:

6,000 lb. (4TRJ6000HD)

7,000 lb. (4TRJ7000HD)

7,500 lb. (4TRJ7500)

8,000 lb. (4TRJ8000)

9,000 lb. (4TRJ9000HD)

Light Duty Deluxe Rolling Jack: Made with stainless steel suspension and rollers with a low maintenance pump. Height extensions and rubber pad adapters in addition, with a telescoping range reach of 30.75” – 63.4″. One year parts warranty included.

3 Available Capacities:

6,000 lb. (4TRJ6000HA)

7,000 lb. (4TRJ7000HA)

7,500 lb. (4TRJ7500HA)

Set of 4 rubber blocks for protecting and assisting the EV during lifting and service.

Set of 2 low profile arm adapters used to pick up correct lift points on lowered vehicles and EV’s with hard to reach lift points, compatible with 2 Post models.

Sliding Arm Adapters (Set of 2) for 2 Post models, assisting in utilizing difficult lift points.

8 piece nickel plated adapters for 2 Post models.

4” rubber replacement pad for 4T42100036.

2 Traverse Beams and 4 Screw Up adapters for Double Scissor model numbers: 4TS6SSOR1, 4TS10SSOR1, 4TS10SSOR1FM.

Factory installed air kit for all 4 Post and Scissor lifts for technicians to use air tools, disconnects not provided.

Heavy Duty, Coats 6,000 lb. capacity air hydraulic rolling jack. For Scissor Lifts with these part numbers: 4TS12OSAR1, 4TS12OSAR1FM, 4TS12OSSR1, 4TS12OSSR1FM. 1 year warranty included.

Set of 2 used during alignment procedures and service.

Set of 2 Stainless Steel Front Turn Plates for all 4 Post and Scissor alignment lifts for additional protection and increasing the lift of the lift.

Set of 2 Stainless Steel Rear Turn Plates for all 4 Post and Scissor alignment lifts for additional protection and increasing the life of the lift.

19K portable adjustable height stand for additional support during service, use with mobile columns.

Set of 2 for all 4 Post and Scissor lifts, assisting the technician in moving in and out of the vehicle when raised.

38K capacity with 2 adapters, available for 19K Mobile Column capacity only.

Set of 2 used to lift the front and rear of light trucks with mobile columns.

Ramp kit with fork lift adapter for specialty applications with mobile columns.

Adjustable frame engaging truck adapter for Coats 10K dual scissor lift and Coats 6K mid rise portable lift

Factory installed pneumatic locking slip plates for rear scissor alignment lifts.

Factory installed LED Runway Lighting Kit (2 pair) for all 4 Post and Scissor lifts.

Set of 4 factory installed front and rear tire air inflators for all 4 Post and Scissor lifts.

25 gallon capacity with anti-slosh baffles, for all 4 Post and Scissor lifts.

Diamond plated non-slip bolt-on ramps with powder coating used for tighter spaces and lowered vehicles.

Pneumatic and electrical power station with tool holder, compatible with all 2 Post and 4 Post lifts.

EV Adapter Set (4pcs) for most Tesla’s and other EV manufacture models.

Set of 2 7” truck adapters for 2 Post 10K and 12K models. Inquire for 16K / 20K capacities.

Coats Lifting Pad – EV Plated Double Screw Adapter with a round style contact area and full rubber covered replaceable lifting pad.