Wheel Balancer Parts & Accessories

2″ Spacer Plate – For Model 6401 / 6450

2″ I.D. For 6401 / 6450 Spacer & Cone for 19.5″ hub centered Budd style wheels with centerhole from 8.52″ to 8.89″ (216.41 – 225.81 mm)

Large Stud Piloted Budd Wheel Adapter- For Heavy Duty Balancers, Bolt Patterns 8x275mm, 10×11.25″ & 10×13-3/16″(335mm)

Adapter – Speedy Dayton – For Heavy Duty Balancers

For Heavy-Duty Balancers. Optional accessory kit for the 8110785 adapter. Allows for mount of 22″ and 24.5″ Dayton style demountable rims.

Cone, Truck – 4.52″ to 6.95″ Center Holes – For Model 6401 / 6450

Cone, Large – 2.98″ to 5.06″ Center Holes – For Model 6401 / 6450

Cone, Small – 2.44″ To 3.12″ Center Holes – For Model 6401 / 6450

The Coats® 525 Wheel Lift helps you elevate heavy tire and wheel assemblies up to the appropriate height with minimal effort. This lift system reduces operator fatigue and the potential for expensive wheel damage, while providing a sliding platform for easy operation and smooth, air-powered scissor lift action. The 525 Wheel Lift is compatible with all 1300, 1400, 1500 and 1600 Direct Drive wheel balancers.

Quick Nut Kit

Premium Slide Nut, 2 Jaw, 40mm, Nut Only, fits standard pressure cup. Binary thread engagement stays fully open during installation, eliminating wear from dragging the teeth across the balancer’s threaded shaft.

40mm / 8mm manual hub nut for standard thread pitch

Forged steel hub nut with bearings

Pressure Cup Assembly, 40mm, Small, 4.625″ Diameter, includes Small Rubber Protection Lip 8112954.

Nut-Slide, 2 Jaw, 40mm, Nut Only – From 2-Jaw Slide Nut Kit 85009998

40mm, with pressure cup. For use on 700-1250 models with 40mm shaft

XL Pressure Drum, 40mm I.D., 8.375ö O.D., with rubber lip

Drum-pressure, for use no 85009996 & 85009998 Slide Nuts, pkg

Replacement Rubber Lip for XL Pressure Drum 8113308 & 8113309

Lip- Pressure Drum, Rubber – for use on 85009996 & 85009998 Slide Nuts pkg

Toyota Truck Kit with Fixed Finger Plate and 2 Direct Fit Offset Plates (5×150 and 6×5.50)

Toyota Offset Adapter (5×150)- 40mm I.D, included in 85009945 Toyota Adapter Kit

Toyota Offset Adapter (6×5.50), 40mm I.D, included in Toyota Adapter Kit 85009945.

Metal Backing Plate, 40mm I.D., 7.91″ O.D., used with Offset Truck Wheel Adapters & Improved Light Truck Front Cone Kit

The Coats® Ford Ultra Low Angle Cone is specified by Ford to be used on 2003 and newer F150, Expedition & Navigator wheels in conjunction with Adjustable Pin Plates.

40mm back cone spring

Cone, Small, Std. A, 40mm I.D., Range: 1.75-2.25″ (44.45-57.15mm)

Medium Cone 2.44″-3.15″From In-Between Set, 40mm

Small Cone 2.05″-2.76″ from In-Between Set, 40mm

Miniature Cone 1.62″-2.33,” from In Between Cone Set, 40mm

In-Between Cone Set comes with 4 cones – minature, small, medium, large. Supplemental set for wheels with shallow wheel centers. Shallow cone angles provide more accurate mounting. Example vehicles requiring these cones include Ford Edge and Chevy Malibu

Short Cone for Wheel Balancer, 40mm i.d., Range 2.650″ – 3.025″ (67.31-76.84mm)

40mm Special Applications Light Truck Cone 3.29″ – 4.47″.

Cone, Light Truck, Std. D, 40mm I.D., Range:3.375-5.00″, (85.73-132.08mm)

Light Truck Front Cone Kit, 40mm I.D., Double Sided Cone & Metal Backing Plate, Range: 4.80″-6.80″

Light truck back cone spacer, For Coats 775/875/1175 Balancers. Allows back coning of wheels with up to 5.20″ (132.08mm) center-holes

Light truck back cone spacer allows back coning of wheels with up to 5.20″ (132.08mm) center-holes. For Coats Balancers (NOT for use on 775/875/1175).

Kit, Truck, 40mm I.D., Spacer & Cone for 19.5″ hub centered wheels with centerhole from 8.52″ to 8.89″ (216.41-225.81mm) (same as 109877 for Model 6401 balancer)

Double Sided Low Angle Collet Kit 40mm covering wheel center bore range from 2.04″- 5.20″ (52mm – 132mm) fits the majority of passenger car and light truck wheels. It aids the technician in replicating the vehicle mounting by more closely matching the center bore of the wheel for a performance balance.

Double Sided Collet – Range 4.49” – 5.20” (114 mm – 132 mm), 40mm. A new retaining cradle helps prevent large, heavy assemblies from damaging balancer shaft during demount process.

Double Sided Collet (9-12) Range 3.66” – 4.49” (93 mm – 114 mm), 40mm

Double Sided Collet (7-8) Range 3.26″-3.69″ (83mm-94mm), 40mm

Double Sided Collet (5 and 6) – Range 2.85″ – 3.28″ (72mm – 83mm), 40mm

Double Sided Collet (3 and 4) – Range 2.45″-2.88″ (62mm-73mm), 40mm

Double Sided Collet (1 and 2) – Range 2.04″-2.47″ (52mm-63mm), 40mm

The Coats® Double Sided Mazda Collet, built with hardened steel and designed with a low angle, provides the tire technician with a durable and precise mounting method that replicates the mounting of the wheel on the vehicle resulting in performance balance that’s done right the first time, every time.

5 finger adjustable pin plate design provides fast and easy clamping of tire and wheel assemblies and prevents damage to alloy wheels. Can be used on any 40 mm wheel balancer. Combines 15 plates into one convenient solution.

4 finger adjustable pin plate design provides fast and easy clamping of tire and wheel assemblies and prevents damage to alloy wheels. Can be used on any 40 mm wheel balancer

3 finger adjustable pin plate design provides fast and easy clamping of tire and wheel assemblies and prevents damage to alloy wheels. Can be used on any 40 mm wheel balancer

One, reliable system that combines 15 plates into 1 to properly balance a wide variety of tire and wheel assemblies. The adjustable design provides fast and easy clamping of tire and wheel assemblies. Can be used on any 40mm wheel balancer

Hole Gauge for Pin Plates

Fixed Finger Plate, ffp10b, 5x135mm & 5×4.25.” The plate has 5 Tapered Fingers set in place and are not adjustable.

Pin-Finger, Set of 6, for Toyota Trucks, Pin OD 1.125″, tip OD 0.5″, Fits Fixed Finger Plates.

Designed to measure the rim width for the balancing process.

Great for removing old Tape-A-Weights from wheels. The tool’s beveled edge also lifts old weights and pops them off the rim.

Spacer No Mar, Plastic.

No Mar Ring

40mm No Mar Ring used with fixed or Adjustable Pin Plates

The hammer will work on any style clip on wheel weight – lead, zinc, and steel. Its anti-marring face is safe for steel, aluminum, and chrome wheels.